License Plate Recognition - A Tutorial

(1) What is LPR?

LPR (License Plate Recognition) is an image-processing technology used to identify vehicles by their license plates. This technology is used in various security and traffic applications, such as the access-control system featured in the following animation:

In the above example: while the vehicle approaches the gate, the LPR unit automatically "reads" the license plate registration number, compares to a predefined list and opens the gate if there is a match.

The system uses illumination (such as Infra-red) and a camera to take the image of the front or rear of the vehicle, then an image-processing software analyzes the images and extracts the plate information. This data is used for enforcement, data collection, and (as in the access-control system featured above) can be used to open a gate if the car is authorized or keep a time record on the entry or exit for automatic payment calculations.

The LPR system significant advantage is that the system can keep an image record of the vehicle which is useful in order to fight crime and fraud ("an image is worth a thousand words"). An additional camera can focus on the driver face and save the image for security reasons. Additionally, this technology does not need any installation per car (such as in all the other technologies that require a transmitter added on each car or carried by the driver).

• Automatic Vehicle Identification (AVI)
• Car Plate Recognition (CPR)
• Automatic Number Plate Recognition (ANPR)
• Car Plate Reader (CPR)

The following example shows a typical installation of an access-control system in the gate of a secured office compound.

The car, with the plate number: W856RKX, is just exiting from the secured area and is picked up by the LPR system which identifies it as an authorized car and opens the gate. A welcome display (which includes the vehicle number and driver name) is displayed in the large outdoor display in the back of the car.

A typical image captured by the Infra-red illumination and camera unit is shown in the following image (this image is of the same car above). The image information is read by the LPR unit and is analyzed and recognized automatically. Note that the image is monochrome since the infra-red spectrum is above the normal color spectrum.

Since the vehicle plates are based on different Country standards, they usually different in form, shape and material. Therefore the LPR systems are Country specific and are adapted to the Country where they are installed and used (in the above case - a UK installation). You can see a large collection of plates of different Countries - download some recognition demoes with the link at the bottom of this page.

The following image shows a zoom into the above image sample. The initial image starts from the raw data, then repeatedly zooms up (with factor x2) until the pixel level.

The computer processing needs to work on the global information (the entire image) for detecting the plate, then zoom into the data in order to handle the small details and finally extract the registration data. The end result of the recognition process is a string (in the above case, "W859RKX"). This transformation of the image data into a result string is actually a very large compression of the original raw data (1:31600 !).

However, recent improvements in the software and hardware have made the LPR systems much more reliable and wide spread. You can now find these systems in numerous installations and the number of systems are growing exponentially, efficiently automating more and more tasks in different market segments. In many cases the LPR unit is added as retrofit in addition to existing solutions, such as a magnetic card reader or ticket dispenser/reader, in order to add more functionality to the existing facility.

• Camera(s) - that take the images of the car (front or rear side)
• Illumination - a controlled light that can bright up the plate, and allow day and night operation. In most cases the illumination is Infra-Red (IR) which is invisible to the driver.
• Frame grabber - an interface board between the camera and the PC, allows the software to read the image information
• Computer - normally a PC running Windows or Linux. It runs the LPR application which controls the system, reads the images, analyzes and identifies the plate, and interfaces with other applications and systems.
• Software - the application and the recognition package. Usually the recognition package is supplied as a DLL (Dynamic Link Library).
• Hardware - various input/output boards used to interface the external world (such as control boards and networking boards)
• Database - the events are recorded on a local database or transmitted over the network. The data includes the recognition results and (optionally) the vehicle or drver-face image file

The following example shows how a typical access-control system works. It follows the order of the animation above.

Parking - the plate number is used to automatically enter pre-paid members and calculate parking fee for non-members (by comparing the exit and entry times). The optional driver face image can be used to prevent car hijacking. In this example, a car is entering a car park in a busy shopping center. The car plate is recognized and stored. When the car will later exit (through the gate on the right side) the car plate will be read again. The driver will be charged for the duration of the parking. The gate will automatically open after payment - or if the vehicle has a monthly permit.
Access Control - a gate automatically opens for authorized members in a secured area, thus replacing or assisting the security gaurd. The events are logged on a database and could be used to search the history of events. In this example, the gate has just been automatically raised for the authorized vehicle, after being recognized by the system. A large outdoor display greets the driver. The event (result, time and image) is logged in the database.
Tolling - the car number is used to calculate the travel fee in a toll-road, or used to double-check the ticket. In this installation, the plate is read when the vehicle enters the toll lane and presents a pass card. The information of the vehicle is retrieved from the database and compared against the pass information. In case of fraud the operator is notified.
Border Control - the car number is registered in the entry or exits to the Country, and used to monitor the border crossings. It can short the border crossing turnaround time and cut short the typical long lines. This installation covers the borders of the entire Country. Each vehicle is registered into a central database and linked to additional information such as the passport data. This is used to track all border crossings.
Stolen cars - a list of stolen cars or unpaid fines is used to alert on a passing 'hot' cars. The 'black list' can be updated in real time and provide immediate alarm to the police force. The LPR system is deployed on the roadside, and performs a real-time match between the passing cars and the list. When a match is found a siren or display is activated and the police officer is notified with the detected car and the reasons for stopping the car.
Enforcement - the plate number is used to produce a violation fine on speed or red-light systems The manual process of preparing a violation fine is replaced by an automated process which reduces the overhead and turnaround time. The fines can be viewed and paid on-line. The photo is an example of a speeding car caught by the traffic camera. The rear vehicle plate is automatically extracted off the scanned film image, replacing a tedious manual operation and the need to develope and print the violation. The datablock on the top-right side is additional speeding information that is automatically extracted from the developed film and used to complete the fine notice and inserted to a database. The violators can pay the fine on-line and are presented with this photo as a proof with the speeding information.
Traffic control - the vehicles can be directed to different lanes according to their entry permits (such as in University complex projects). The system effectively reduces traffic congestions and the number of attendents. In this installation the LPR based system classifies the cars on a congested entrance to 3 types (authorized, known visitors, and unknown cars for inquiry) and guides them to the appropriate lane. This system reduced the long waiting lines and simplified the security officers work load.
Marketing Tool - the car plates may be used to compile a list of frequent visitors for marketing purposes, or to build a traffic profile (such as the frequency of entry verses the hour or day).
Travel - A number of LPR units are installed in different locations in city routes and the passing vehicle plate numbers are matched between the points. The average speed and travel time between these points can be calculated and presented in order to monitor municipal traffic loads. Additionally, the average speed may be used to issue a speeding ticket. In this example the car is recognized at two points, and the violation shows the photos of both locations which were taken on bridges on top of the highway. The average speed of the car is calculated from both points, and displayed if the speed passed a violation threshold, and optionally printed.
Airport Parking - In order to reduce ticket fraud or mistakes, the LPR unit is used to capture the plate number and image of the cars. The information may be used to calculate the parking time or provide a proof of parking in case of a lost ticket - a typical problem in airport parking which have relatively long (and expensive) parking durations. This photo shows the gate of a long term airport parking. The car is recognzied on entry and the data is later used to track the real entry time in case of a lost ticket.

You can see a typical installation for each application type in the web link below. Additionally, you can visit the product selection guide there that matches the market need to the solution, and also points to sample applications.